16" Foam Planer w/Carbide Blades

The 16" carbide blade unit, with pneumatic motor, is recommended for use on 2 to 10+ pound closed cell foam. This tool is primarily used on roofs, commercial cold storage buildings, and other similar projects. The carbide blades and wire brushes are interchangeable.

Requirements: The air motor operates most efficiently when air pressure is maintained at 90-95 psi. An air compressor able to deliver 23.0 cfm is necessary. Incoming air should be DRY, clean and filtered 3/4" line from compressor. Last 20' use 1/2" airline. Lubricate this tool at least once every 8 hours by pouring a small quantity of air motor oil through the air inlet.

Safety: Although every effort has been made to make the foam plane and brushes as safe as possible, it is the responsibility of the user to wear appropriate safety gear. Adequate eye protection is a must.

$ 1,635.00

Quantity :

Ask us a question about this product: